Rapid Hormetic Responses of Photosystem II Photochemistry of Clary Sage to Cadmium Exposure

Five-day exposure of clary sage (Salvia sclarea L.) to 100 μM cadmium (Cd) in hydroponics was sufficient to increase Cd concentrations significantly in roots and aboveground parts and affect negatively whole plant levels of calcium (Ca) and magnesium (Mg), since Cd competes for Ca channels, while reduced Mg concentrations are associated with increased Cd tolerance. Total zinc (Zn), copper (Cu), and iron (Fe) uptake increased but their translocation to the aboveground parts decreased. Despite the substantial levels of Cd in leaves, without any observed defects on chloroplast ultrastructure, an enhanced photosystem II (PSII) efficiency was observed, with a higher fraction of absorbed light energy to be directed to photochemistry (Φ_PSΙΙ). The concomitant increase in the photoprotective mechanism of non-photochemical quenching of photosynthesis (NPQ) resulted in an important decrease in the dissipated non-regulated energy (Φ_NO), modifying the homeostasis of reactive oxygen species (ROS), through a decreased singlet oxygen (¹O₂) formation. A basal ROS level was detected in control plant leaves for optimal growth, while a low increased level of ROS under 5 days Cd exposure seemed to be beneficial for triggering defense responses, and a high level of ROS out of the boundaries (8 days Cd exposure), was harmful to plants. Thus, when clary sage was exposed to Cd for a short period, tolerance mechanisms were triggered. However, exposure to a combination of Cd and high light or to Cd alone (8 days) resulted in an inhibition of PSII functionality, indicating Cd toxicity. Thus, the rapid activation of PSII functionality at short time exposure and the inhibition at longer duration suggests a hormetic response and describes these effects in terms of “adaptive response” and “toxicity”, respectively.     

Synthesis,Anticancer Activity,Structure-Activity Relationship and Mechanistic Investigations of Falcarindiol Analogues

Forty samples of optically active falcarindiol analogues are synthesized by using the easily available C2 symmetric (R)- and (S)-1,1’-binaphth-2-ol (BINOL) in combination with Ti(OⁱPr)₄, Zn powder and EtI. Their anticancer activities on Hccc-9810, HepG2, MDA-MB-231, Hela, MG-63 and H460 cells are assayed to elucidate their structure-activity relationships. These results showed that the falcarindiol analogue (3R,8S)- 2 i with the terminal double bond has the most potent anti-proliferation effect on Hccc-9810 cells with IC₅₀ value of 0.46 μM. The falcarindiol analogue (3R,8S)- 2 i can induce obvious Hccc-9810 cell apoptosis in a concentration-dependent manner by Hoechst staining and flow cytometry analysis. The proposed mechanism suggests that the falcarindiol analogue (3R,8S)- 2 i increases LDH release and MDA content, and reduces the levels of SOD activity, which lead to the accumulation of oxidative stress and induce apoptosis in Hccc-9810 cells.     

防气窜固井技术研究

从气窜机理、气窜预测方法、提高水泥浆防气窜性能、防气窜固井工艺技术四个方面进行研究,为固井防气窜提供理论依据,进而提升防气窜固井技术。     

High-entropy ferroelastic rare-earth tantalite ceramic: (Y0.2Ce0.2Sm0.2Gd0.2Dy0.2)TaO4

In this study, high-entropy rare-earth tantalate ceramics (Y_0.2Ce_0.2Sm_0.2Gd_0.2Dy_0.2)TaO₄ ((5RE_0.2)TaO₄) have been successfully fabricated. The possibility of formation of (5RE_0.2)TaO₄ was verified via first-principles calculations. In addition, the phase structure, ferroelastic toughening mechanism, thermophysical, and mechanical properties were systematically investigated. The (5RE_0.2)TaO₄ ceramics have lower phonon thermal conductivity (1.2–2.6 W·m^–1·K^–1) in the entire temperature range than that of RETaO₄ and YSZ. (5RE_0.2)TaO₄ has a higher fracture toughness and lower brittleness index than YSZ. The thermal expansion coefficients of (5RE_0.2)TaO₄ are as high as 10.3 × 10^-6 K^–1 at 1200°C and Young's modulus is 66–189 GPa, and thus, (5RE_0.2)TaO₄ possesses great potential for application in thermal barrier coatings (TBCs).     

Interactions of Li2O volatilized from ternary lithium-ion battery cathode materials with mullite saggar materials during calcination

In recent years, the rapid development of Li(Ni_xCo_yMn_1-x-y)O₂ (LNCM) materials for application in ternary lithium-ion batteries has led to an increased demand for refractory kiln saggars in industries. However, saggars used for firing ternary Li-ion battery cathode materials are often subjected to severe corrosion and spalling. To investigate the damage mechanism of the saggar materials, non-contact corrosion experiments were designed to study the effects of the precursor additions, calcination temperature, and number of calcinations during the interaction between mullite saggar and LNCM materials. The phase composition and microstructure of the mullite saggar specimens before and after corrosion were characterized using X-ray diffraction and scanning electron microscopy, respectively, to obtain a comprehensive understanding of the causes of the deterioration of mullite saggar materials during corrosion.     

A review on direct synthesis of dimethoxymethane

Polyoxymethylene dimethyl ethers are recognized as the prospective diesel additive to decrease the pollutant emission from the light-duty vehicles, which can be polymerize form the monomer of dimethoxymethane (DMM). The industrial synthesis of DMM is mainly involved two-step process: methanol is oxidized to form the formaldehyde in fixed bed reactor and then reacted with the generated formaldehyde through acetalization in continuous stirred-tank reactor. Due to huge energy consumption, this typical synthesis route of DMM needs to be upgraded and more green routes should be determined. In this review, four state-of-the-art one-step direct synthetic routes, including two upgrading routes (methanol direct oxidation and direct dehydrogenation) and two green routes (methanol diethyl ether direct oxidation and carbon oxides direct hydrogenation), have been summarized and compared. Combination with the reaction mechanism and catalytic performance on the different catalysts, the challenges and opportunities for every synthetic route are proposed. The relationships between catalyst structure and property in different synthesis strategy are also investigated and then the suggestions of the design of catalyst are given about future research directions that efforts should be made in. Hopefully, this review can bridge the gap between newly developed catalysts and synthesis technology to realize their commercial applications in the near future.     

基于VMD和改进TCN的短期光伏发电功率预测

光伏发电功率存在波动性,且光伏出力易受各种气象特征影响,传统TCN网络容易过度强化空间特性而弱化个体特性。针对上述问题,文中提出一种基于VMD和改进TCN的短期光伏发电功率预测模型。通过VMD将原始光伏发电功率时间序列分解为若干不同频率的模态分量,将各个模态分量以及相对应的气象数据输入至改进TCN网络进行建模学习。利用中心频率法确定VMD的最优分解模态分解个数。在传统TCN预测模型的基础上,使用DropBlock正则化取代Dropout正则化以达到抑制卷积层中信息协同的效果,并引入注意力机制自主挖掘并突出关键气象输入特征的影响,量化各气象因素对光伏发电的影响,从而提高预测精度。以江苏省某光伏电站真实数据为例进行仿真实验,结果表明所提预测方法的RMSE为0.62 MW,MAPE为2.03%。     

Experimental study on the deformation and failure mechanism of overburden rock during coal mining using a comprehensive intelligent sensing method

Understanding the spatiotemporal evolution of overburden deformation during coal mining is still a challenge in engineering practice due to the limitation of monitoring techniques. Taking the Yangliu Coal Mine as an example, a similarity model test was designed and conducted to investigate the deformation and failure mechanism of overlying rocks in this study. Distributed fiber optic sensing (DFOS), high-density electrical resistivity tomography (HD-ERT) and close-range photogrammetry (CRP) technologies were used in the test for comprehensive analyses. The combined use of the three methods facilitates the investigation of the spatiotemporal evolution characteristics of overburden deformation, showing that the mining-induced deformation of overburden strata was a dynamic evolution process. This process was accompanied by the formation, propagation, closure and redevelopment of separation cracks. Moreover, the key rock stratum with high strength and high-quality lithology played a crucial role in the whole process of overburden deformation. There were generally three failure modes of overburden rock layers, including bending and tension, overall shearing, and shearing and sliding. Shear failure often leads to overburden falling off in blocks, which poses a serious threat to mining safety. Therefore, real-time and accurate monitoring of overburden deformation is of great significance for the safe mining of underground coal seams.     

Effects of andalusite and kyanite addition on the microstructure,thermo-mechanical properties and corrosion resistance of ultralow-cement bauxite-corundum castables

Ultralow-cement bauxite-corundum refractory castables are increasingly attracting attention because of the advantages in performance and cost. To improve its volume stability and high-temperature performance, andalusite and kyanite were incorporated into this type of refractory, respectively, and a comparative investigation of their effects on microstructure, thermo-mechanical properties, and slag corrosion resistance was carried out in this work. The expansion effects induced by the mullitization of these additives not only suppressed the sintering shrinkage but also made the matrix structure more compact and uniform, mainly owing to the generation of many new and strong mullite bonds. This improvement resulted in a significant increase in the refractoriness under load and creep resistance. This effect was far more pronounced for the andalusite-added castables, for which the RUL increased by 62 °C and the creep rate at the stationary stage decreased by 26%. Besides, adverse effects on microstructure and properties appeared when adding a higher amount of kyanite due to the excessive expansion. Moreover, the corrosion mechanisms of these refractory castables by refining slag were discussed, and the active role of andalusite addition in the corrosion resistance was also proposed.